The weight distribution bars are not interchangeable between manufacturers and often times are specific to a certain hitch due to the weight rating.
You can replace your Ultra-Fab hitch which is obsolete with a Curt MV Weight Distribution System # C17052 for a comparable system. This is a basic weight distribution hitch that is rated for tongue weights of 800-1,000lbs and a maximum trailer weight of 10,000lbs.
I recommend upgrading to a Fastway e2 Weight Distribution # FA92-00-1000... view full answer...
Gen Y makes cushioned weight distribution shanks that are compatible with Husky Centerline weight distribution systems like the part # GY54FR which fits a 2 inch hitch and part # 325-GH-1102 which fits a 2-1/2 inch hitch. view full answer...
The replacement trunnion spring bars for the 1,200 lb tongue weight Fastway e2 Weight Distribution with 2-Point Sway Control # FA92-00-1200 come as a pair and are the following:
- Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems - 1,200 lbs TW # FA92-01-1299 view full answer...
You can certainly upgrade your weight distribution shank to fit your new Class V, 2-1/2 inch hitch and existing weight distribution head.
For your Ford F-350 Class V hitch and Reese Strait-Line Weight Distribution System # RP66084, I recommend the Equal-I-zer Weight Distribution Shank, 2-1/2 Inch Hitch # EQ90-02-4900. The rise and drop of this shank is measured with a head from an Equal-I-zer weight distribution system, but will still allow you to have a rise between 8 inches and 10 inches... view full answer...
The replacement head we offer for Husky weight distribution hitches is part # HT31516. This head is the replacement for husky round-bar weight distribution.
The hitch models this head fits is 30849, 31421, 31422, 31423, 31425, 31427, 31428, 31986, 31995, 31996, and 31997.
You will want to check the system you have and if it is one of the above mentioned systems then the # HT31516 is the right head for you. view full answer...
Yes. You can re-use the nylon lock nuts on your Husky # HT32218 weight distribution hitch if you need to re-position the hitch head. view full answer...
Unfortunately, the Reese 54917 is only one of their drop shanks and does not tell me what weight distribution hitch you have. I can tell you the Replacement Lift Brackets # RP6637 are currently the only frame brackets we carry separately from the Reese line of weight distribution hitches. If these are not the brackets you are needing please provide me with some additional information on your hitch and I can help you find some alternative options. view full answer...
We do carry replacement round bars for the 10,000 lb towing/1,000 lb tongue weight Fastway e2 Weight Distribution Hitch # FA94-00-1061. The correct replacement spring bar for this hitch are the following:
- Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems # FA94-02-1099 view full answer...
Definitely! From the looks of your attached pictures, you definitely have a Fastway e2 weight distribution hitch that uses a trunnion spring bar like the # FA92-00-0600.
I went ahead and reached out to my contact at Fastway, and he confirmed that the head assembly needs to be replaced. They do not sell the missing mount that you need individually. The replacement part you need for your hitch is the Replacement Head for Fastway e2 Weight Distribution Systems - Trunnion Bar # FA92-02-1255. view full answer...
We may have what you are looking for, but since I'm not 100 percent sure what system you have or a specific part number, I'm going to give you some options, but if these are not what you are looking for, please do let me know.
- Replacement Spring Bar Retention Bracket Kit for Reese Steadi-Flex Weight Distribution System # RP58498
- Replacement Trunnion and Pin for Reese 1200 - 1700 lb Trunnion Style Weight Distribution # 58097 view full answer...
The Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW # RP54977 is a fit for your system. The Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitches - 9" Long - 9 Hole Adjustment # BXW4028, the Curt Weight Distribution Shank for 2-1/2" Hitches - 12" Rise - 9-1/4" Drop # C17132, the Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop # EQ34FR, and Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop # EQ94FR are all... view full answer...
I have an option for you but the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9460 will not be the correct L-pin replacement for your Fastway e2 Weight Distribution Hitch FA92-00-1000.
The correct replacement will be the Replacement L-Pin for Fastway e2 Weight Distribution Systems # FA92-03-9205. This replaces the L-pin on one of the sway control brackets on your 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight distribution system. view full answer...
I spoke with my contact at Reese and he informed me that yes, you can swap the Reese Replacement Trunnion Spring Bar, 1,700 lbs, part # 66010 into your Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW, part # RP66131, to increase the capacity of your weight distribution system to 1,700 lbs.
The head of your weight distribution system is capable of the 1,700 lbs, however you will need to make sure the the shank you are using is capable of 1,700 lbs tongue... view full answer...
We have exactly what you are looking for.
The correct replacement head assembly for your Reese Strait-Line Weight Distribution Hitch # RP66130 is the Replacement Head for Reese Weight Distribution System - Trunnion Bar # RP58167.
Now this assembly does not include a hitch ball so you will also need 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.
I included videos of the products mentioned for you to take a look at. view full answer...
The Curt Spring Bar Retainer Package # 17109 is what you need for the Curt MV Weight Distribution System # C17057. The new retainers are held in place using screws rather than pins. view full answer...
Sorry to hear about your troubles. Based off of the information you have provided me it sounds like your father in law had a Blue Ox SwayPro System. You're in luck because there are plenty of replacement parts available for this system.
To start out with you will need a replacement shank. Depending on the hitch receiver of your truck you will either need the 2" model. Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 7 Hole Adjustment item # BXW4000. Or the 2-1/2" model,... view full answer...
We do sell replacement brackets for some weight distribution systems. For example, the Replacement Lift Brackets with Handle # RP6637 is a replacement set of brackets for Reese weight distribution systems. If you can provide us with more information on the weight distribution system you are currently using, then we can try to match up a set of clamps/brackets for you. I have attached a link to our replacement parts for weight distribution hitches. view full answer...
I can certainly point you in the right direction. Generally we like to confirm the model number of your specific weight distribution hitch in order to recommend a spring bar. There have been a few different 1,000 lb systems from Draw-Tite (now Reese) over the years.
For example, the current 10K Strait-Line Weight Distribution System # RP66087 uses the Replacement Round Spring Bar # RP58114.
If this is not exactly what you have, feel free to reach out to me with a model number, or even... view full answer...
We do have what you need, as the only TruTrack that comes with the adjustment rods is the 15,000 lb/1,500 lb tongue weight Curt TruTrack Weight Distribution System with Sway Control # C17501.
To get the adjustment rods for this system you will need something different than what you mentioned; it will require the Replacement Hardware Kit for Curt TruTrack Weight Distribution System # C17554.
This comes with the adjustment rods as well as other hardware for the 15,000 lb system. view full answer...
While there are plenty of adjustable ball mounts that have a similar style to a weight distribution (WD) shank, like the Pro Series # RP63971, there are no pieces that can be combined with a weight distribution shank to make it like a typical ball. The only way to accomplish this is to purchase a WD head unit and use it like a ball mount but that is still fairly costly and will be much heavier too.
I've attached a link to our selection of adjustable ball mounts for you to filter through... view full answer...
Go To Results